风冷风机
用于 LSP-600 换能器冷却的风机
该电动风机用于冷却 ISM LSP-600 超声波液体处理器（直通式配置）配套的 ACT-22-LSP 压电换能器。通过该装置，可有效带走换能器在连续运行过程中产生的热量，从而使处理器能够长时间连续工作（最长约 1 至 2 小时）。
用于 LSP-600 换能器冷却的风机
该电动风机用于冷却 ISM LSP-600 超声波液体处理器（直通式配置）配套的 ACT-22-LSP 压电换能器。通过该装置，可有效带走换能器在连续运行过程中产生的热量，从而使处理器能够长时间连续工作（最长约 1 至 2 小时）。
Description
Air Blower for Cooling the LSP-600 Transducer
This electric air blower is used to cool the ACT-22-LSP piezoelectric transducer supplied with ISM’s LSP-600 ultrasonic liquid processor configured in the flow-through mode. With this device, the heat generated in the transducer during continuous operation is efficiently removed, allowing the processor to work continuously for extended periods of time (up to about 1 – 2 hours).
Technical Information
- Overall dimensions: 6.6″ x 3.9″ x 3.9″
- Electric air blower with 26 cfm maximum air flow
- Material: ABS plastic
- 320 W rated power
- Speed controller
- Air hose
Description
Air Blower for Cooling the LSP-600 Transducer
This electric air blower is used to cool the ACT-22-LSP piezoelectric transducer supplied with ISM’s LSP-600 ultrasonic liquid processor configured in the flow-through mode. With this device, the heat generated in the transducer during continuous operation is efficiently removed, allowing the processor to work continuously for extended periods of time (up to about 1 – 2 hours).
Technical Information
- Overall dimensions: 6.6″ x 3.9″ x 3.9″
- Electric air blower with 26 cfm maximum air flow
- Material: ABS plastic
- 320 W rated power
- Speed controller
- Air hose
